Replacing The Hard Disk Drive - Lenovo C340 User Manual

6. Push out the latches on both sides of the memory socket to release the
memory module
from its socket.
procedure.
7. To install a memory module:
Align the new memory module with the memory socket, then insert it and push
down on the top edge. Make sure the latches lock the memory module in place.
8. Reattach the foot cover and stand base.

Replacing the hard disk drive

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool
down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat
surface for this procedure. Lenovo recommends that you use a blanket,
towel, or other soft cloth to protect the touch screen from scratches or
other damage.
1. Remove any media (disks, CDs, or memory cards) from the drives, shut down
the operating system, and turn off the computer and all attached devices.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer. Refer to "Left and right views" and "Rear view" for help with locating
the various connectors.
34
User Guide
and gently pull the memory module upward to remove it
All of the memory modules can be removed using the same