Subsonic Filter - Diamond D1000.1 Installation Manual

Thank you for choosing a new Diamond Audio amplifier. Diamond Audio amplifiers are engineered and produced with the highest quality materi-
als and incorporate the latest technology. We think you will find your new Diamond Audio amplifier meets or exceeds your expectations and
provides excellent value.
Properly installed, your new Diamond Audio amplifier will provide years of high quality sonic reproduction. Before installing the amplifier in your
vehicle, please read this entire manual carefully. It is required reading for the protection of your vehicle and for the maximum performance of
your mobile audio system. All Diamond Audio amplifiers have been extensively tested and "burned-in" for maximum reliability. If after reading
this manual, you still have questions regarding this product, we recommend that you contact your authorized Diamond Audio dealer for expert
installation assistance.
If you need assistance with repair or warranty, detailed warranty and return/repair information is listed in the back of this manual. Be sure you
record your serial number, model number and date of purchase for your amplifier as this will be necessary for any returns.
Please Practice Safe Sound!
Continuous exposure to sound pressure levels over 100 dB may cause permanent hearing loss. High powered mobile audio systems may produce
sound pressure levels well over 130dB. Use common sense and practice safe sound.
• Pulse Width Modulated (PWM) MOSFET Switching Power Supply
•Nickel plated, low resistance power and speaker connector blocks
• Thermal, Short Circuit, and Overload (Low Impedance) Protection
• Chassis mounted ATC/ATO type automotive fuses (except D1000.1)
• Internal 24dB/Octave Variable Low Pass Filter (12dB on D400.1)
2
Congratulations!
All Diamond Amplifiers Feature:
• Up to 12 dB Bass Boost
• Extruded Aluminum Heatsink
•Nickel Plated RCA Low Level Audio Inputs
• Power ON and Protection LED Lighting for Easy Diagnostics
• Proudly Designed and Engineered in the USA
D300.2 / D300.4 / D600.4 Features
•Class AB Amplifier Topology
• Stable into 2 ohm Stereo Loads
• Internal 12dB/Octave Variable High Pass or Low Pass Filter
• Hi-level inputs on D300.2 and D300.4
• Pass -Thru Line Output for Daisy Chaining Amplifiers
• Bridgeable Output Capability (4ohms)
D400.1 / D600.1/ D1000.1 Features
•Class D Amplifier Topology (Class AB on D400.1)
•Stable into 1 Ohm (2 Ohm on D400.1)
• Hi-level inputs on D400.1
• Pass -Thru Line Output for Daisy Chaining Amplifiers
• Remote Level Control
• D600.1 and D1000.1 are Sync capable
• 0° or 180° Phase Control

• Subsonic Filter