Transmitter Configuration, Characterization, and Calibration
Figure 5-1
Configuration window
Whenever you make configuration changes on a particular tab, the tab color changes to yellow. To
send the changes you have made to the transmitter, click
individual tab, click
After you click
Before you click
configuration. The new value(s) will be sent to the transmitter, and will take effect immediately.
Click
Cancel
Installation and Use Manual
.
Cancel
, the following dialog box appears:
Apply
, make sure your process is in a state that can tolerate the new transmitter
OK
if this is not acceptable. After you click
. To discard changes on an
Apply
, the tab display color returns to gray.
OK
45