1
Preparations
1.3
Installation
1.3.1 Attaching the cradle
Place a protective cloth
orcushion on a flat surface. Next,
place the product with the face
down on top of the cloth or
cushion. rotate the stand body
about 90°
Tightly fasten the screw to the
bottom of the base.
- Caution
Do not put the hand below the
stand body.
Disassembly is the reverse order of assembly.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Remove the packing sheet
After installing the stand, place
the product upright.
Do not hold the product upside
down only by the stand.
Insert the stand base into the
stand body in the direction of the
arrow.
1 Preparations
24