Adobe 65011817 - Fireworks CS4 - Mac Extended User Manual page 101

Last updated 12/8/2009
Usage
dom.knifeElementsFromPoint(from, tolerance)
Arguments
A point that specifies the x,y coordinates of the point that the user clicked (see
from
A floating-point value > = 0 that specifies the tolerance within which items are cut.
tolerance
Returns
A Boolean value: if anything was cut;
true
Description
When the user clicks a single point while using the Knife tool, this function cuts paths within the specified tolerance.
This action is similar to using the Knife tool with a single click.
See also
dom.knifeElementsFromPoints()
dom.knifeElementsFromPoints()
Availability
Fireworks 3.
Usage
dom.knifeElementsFromPoints(from, to, tolerance)
Arguments
A point that specifies the x,y coordinates of the point where the user clicked and started to drag (see
from
type" on page 8).
A point that specifies the x,y coordinates of the point where the user ended the drag operation.
to
A floating-point value > = 0 that specifies the tolerance within which items are cut.
tolerance
Returns
if anything is cut;
true false
Description
When the user drags while using the Knife tool, this function cuts additional items within the specified tolerance. This
action is similar to using the Knife tool with a drag operation.
See also
dom.knifeElementsFromPoint()
dom.linkElementMask()
Availability
Fireworks 4.
otherwise.
false
otherwise.
EXTENDING FIREWORKS
The Document object
"Point data type" on page 8).
"Point data
97