Stamp The Drawing And Add Objects - Autodesk 23802-091408-9325 - UPG DWF COMPOSER 2 Getting Started Manual

Step 7: Stamp the Drawing and Add Objects
You can stamp a drawing with a status at any point along the way or
add objects importing from virtually any catalog.
Design Review has seven preconfigured stamps. Once you stamp
a drawing, you can change the text and appearance of the stamp.
(Figure 7.1)
1. To stamp a drawing, click on the downward pointing arrow of the
Create Stamp and Symbols tool
drop-down list.
2. Click where you want the lower, left corner of the stamp to
appear. (Figures 7.2)
3. Change the text in the Stamp, by using the Select Objects tool
to select the Stamp. Double click to engage the text box. Change
the text from "Preliminary" to "Draft 1".
4. After selecting any Markup, Stamp, or Symbol you can rotate or
resize it by grabbing and moving the object.
5. To import a symbol or object library, Click on the Stamps and
Symbols button and select Import DWF as Symbol Catalog.
Browse and find the DWF file you want to import.
Any DWF file can be imported including AutoCAD object libraries
published to DWF or other graphics files published using the
Autodesk DWF Writer. Once imported, the symbols or objects
act just like the Stamps.
Autodesk Design Review Getting Started Guide
0
and select a stamp from the
(Figures 7.3)