Connecting An Ipod; Use A Dedicated Cable To Enjoy Ipod Video; Connecting A Usb Device - Pioneer Elite VSX-43 Operating Instructions Manual

2
2

Connecting an iPod

This receiver has a dedicated iPod/iPhone/iPad terminals that
will allow you to control playback of audio content from your
iPod using the controls of this receiver.
USB cable that
comes with the iPod
iPod/iPhone/iPad
Note
• An iPod/iPhone/iPad can be connected to the receiver. For
details on supported models and versions of the respective
products, see Playing an iPod on page

Switch the receiver into standby, and then use the iPod
cable to connect your iPod to the iPod/iPhone/iPad
terminals on the front panel of this receiver.
• For the cable connection, also refer to the operating
instructions for your iPod.
• When connecting an iPhone to this unit, keep the iPhone
at least 20 cm away from this unit. If the iPhone is kept
closer to this unit and a telephone call is received by the
iPhone, noise may be output from this device.
• iPod recharging occurs whenever an iPod is connected to
this unit. (Recharging is enabled only when the unit's
power is turned on.)
• For instructions on playing the iPod, see
page 27.

Use a dedicated cable to enjoy iPod video

If an iPod is connected using a dedicated iPod connection
cable (sold separately), then video from the iPod can also be
enjoyed on a TV that is connected to the receiver.
• The iPod cable is not included with this receiver. The
optional iPod cable from Pioneer is sold separately under
the part number L308102013030-IL. Contact the Pioneer
Customer Support division for more information on
obtaining an optional iPod cable.
• iPhone5, iPad 4th generation, iPad mini, iPod touch 5th
generation and iPod nano 7th generation cannot be
connected using a separately sold iPod cable.
27.
iPod/iPhone/iPad
Note
• Due to linked operation of the HDMI control function, if a
supported TV and receiver are connected using a HDMI
Playing an iPod on
cable and the TV input is changed during iPod input, the
receiver may automatically also change to TV input. If this
happens, please either change the receiver's input back to
iPod, or turn OFF the HDMI control function (see
Setup on page

Connecting a USB device

It is possible to play audio and photo files by connecting USB
devices to this receiver.

device to the iPod/iPhone/iPad terminals on the front panel
of this receiver.
• This receiver does not support a USB hub.
• For instructions on playing the USB device, see
USB device on page
iPod cable
21
Connecting your equipment
55).
Switch the receiver into standby then connect your USB
28.
USB mass
storage device
4
7
HDMI
62
Playing a