Introduction; Installing A Wall-Mount Bracket - Insignia NS-L22X-10A User Manual

NS-L22X-10A_09-0222_MAN_V1_English.book Page 4 Thursday, April 2, 2009 12:14 PM

Introduction

Congratulations on your purchase of a high-quality
Insignia product. Your NS-L22X-10A represents the
state of the art in LCD TV design and is designed for
reliable and trouble-free performance.
Installing a wall-mount
bracket
Warning
This apparatus is intended to be supported by UL
Listed wall mount bracket.
To install a wall-mount bracket:
Warning
These servicing instructions are for use by qualified
service personnel only. To reduce the risk of hazards,
do not perform any servicing other than that
contained in the operating instructions unless you
are qualified to do so.
1 Remove the three screws that secure the stand
to your TV.
2 Remove the stand.
4
3 Insert and lock the standoff screws (provided)
into the lock holes of the VESA mount.
4 Attach the wall-mount bracket with M4 screws
(not included).
www.insigniaproducts.com
3.94" (100 mm)
3.94" (100 mm)