Monster Power POWERCENTER HTFS1000 Owner's Manual page 16

INSTALLATION OF MONSTER HTFS 1000
POWERCENTER
HTFS 1000 Mounting Instructions
Step 1. Determine where you will mount your HTFS PowerCenter.
Fit bracket A to a side-fl ap, holding it to the wall and marking the holes.
Step 2. Fasten Bracket A to the wall with standard 1" self-tapping drywall screws
(Hardware not included).
Step 3. Insert one of the side-fl aps of the HTFS PowerCenter into bracket A.
Step 4. Fit Bracket B to the other side-fl ap, make sure it is secure and
fasten it to the wall with screws.
™ WALL-MOUNT BRACKETS
™
11