Summary of Contents for Magnadyne MobileVision M135C-4
- Page 1 Owner’s/Installation Manual MENU MODE POWER 7” Color LCD Monitor Model: M135C-4 For Technical Assistance, please call (800) 638-3600, or visit www.magnadyne.com...
-
Page 2: Table Of Contents
Magnadyne Corporation disclaims any and all liability that may result from failure to install and operate in any other manner in which this was intended. -
Page 3: Monitor Features And Controls
Monitor Features and Controls MENU MODE POWER 1. Volume Buttons (- and + ): Press to adjust 4. Camera Display Configuration Button (MODE): Press to select different camera the speaker’s volume. display configurations. 2. Menu Button: Press to access the monitor’s 5. -
Page 4: General Operation
General Operation Turning the Monitor On: The monitor is operational by activating the ignition MENU MODE POWER key then manually pressing the power switch on the unit. Selecting the Camera View Press to select the desired camera view. MENU MODE POWER Note: When the camera is automatically selected (Example: the vehicle is put into reverse) the camera image will... -
Page 5: Wiring Diagram
General Operation Monitor Adjustment To access the monitor adjustment features, press the MENU button. Use the - or + buttons to make adjust- MENU MODE POWER ments to the selected function. Menu Functions: • Brightness • Contrast • Saturation • Hue MENU •... -
Page 6: Installation Instructions
Installation Instructions Pedestal Mounting the Monitor 1. Loosen the thumb wheel on the base support so the nut attached to the thumb wheel can slide into the monitor’s mounting channel. 2. Slide the thumb wheel nut into the channel on the back of the monitor. 3. -
Page 7: Technical Specifications
Technical Specifications Display Size: 7-inch Display Format: 16:9 System: PAL/NTSC Power Supply: 12-32V Power: 12W Picture Resolution: 800x480... -
Page 8: Warranty
Warranty ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specific product.