Advertisement
Problem
----------------------------------------------------------------------------------------------------------------------------------------------------
Gauge will not light up
(red light is off)
Gauge will not light up
(red light is flashing slowly)
Gauge will not light up
(red light is flashing rapidly)
Gauge will not light up
(red light is on steady)
Gauge lights up, but
displays "EE".
Gauge lights up, but
displays "--".
Gauge lights up, but does
not read correctly.
Display will not dim.
Display remains dim at all
times.
Switches will not operate
any of the solenoids.
Compressor will not shut off.
DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any questions or
problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems.
Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorization
number. Package the product in a good quality box along with plenty of packing material. Ship the product by UPS or insured Parcel Post. Be sure to include the RMA
number on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone number
where you can be reached during the day. Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase. Send no money. We will
bill you after repair.
DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material or
workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, such defect(s) will be repaired or replaced at Dakota Digital's option.
This warranty does not cover nor extend to damage to the vehicle's systems, and does not cover removal or reinstallation of the product. This Warranty does not
apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or
accident.
This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be limited to
the duration of this written warranty. Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within a period of 24
months from date of original purchase. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with
the sale of this product.
Possible cause
RED wire does not have
power.
BLACK wire is not getting
a good ground.
YELLOW wire does not
have power.
The key is not on.
Display harness is unplugged.
Gauge is damaged.
The harness to the display is
damaged.
Sender is not connected
to gauge.
Wire between controller and
sender is broken.
Sender is not grounding
properly.
Controller is damaged.
Sender is damaged.
Sender wire is shorted to
ground.
Sender is damaged.
Loose connection on
power wire.
Poor sender ground.
Poor ground connection.
Incorrect sender type.
Blue wire is not connected
correctly.
Gauge is damaged.
Blue wire is getting power
all of the time.
Battery is very low.
Gauge is damaged.
10A fuse is blown.
Tank reading incorrect
(much higher than actual)
Compressor wired incorrectly
SERVICE AND REPAIR
Dakota Digital 24 Month Warranty
4510 W. 61ST St. N., Sioux Falls, SD 57107
Phone: (605) 332-6513
www.dakotadigital.com
dakotasupport@dakotadigital.com
©Copyright 2005 Dakota Digital Inc.
6
Solution
Connect to a location that has power.
Connect ground to a different location.
Connect to a location that has power
with the key on.
The ignition key must be turned on.
Seat connectors in tightly at both ends.
Return gauge for repair. (see instructions)
Inspect harness, contact factory for
additional checks or instructions.
Connect wires from gauge to sender
terminals.
Test and replace wire.
PSI senders ground through it's mounting
threads. Make sure the threads are
clean. Do Not Use Tape or Sealant
on Sender Threads.
Return gauge for repair. (contact factory)
Return for replacement. (see instructions)
Check wire for damaged insulation, replace
if necessary.
Return sender for repair. (contact factory)
Reconnect wire going to PWR terminal.
Make sure sender case is getting a solid
ground.
Move ground to different location
Make sure sender has been replaced with
the correct type.
Check wiring connections.
Return gauge for repair. (contact factory)
Connect blue wire to a location that only
has power when the headlights are on.
Recharge or replace vehicle battery.
Return gauge for repair. (contact factory)
Replace fuse.
Check that 400PSI sensor (has 2 terminals)
used on tank.
Please consult service manual for the compressor
to verify wiring.
FAX: (605) 339-4106
MAN# 650031C
Advertisement
