Troubleshooting Guide - Curtis LCDVD193A Instruction Manual

TROUBLESHOOTING GUIDE

SYMPTOM
No power.
• Make sure the AC power cord is connected.
• Turn on the unit.
• Remove any obstacles between the remote and the unit.
The remote does not
• Use the remote near the unit.
function.
• Point the remote at the remote sensor on the unit.
• Replace the batteries in the remote with new ones.
DVD
No sound or only a
• Make sure that you've selected DVD mode.
very low-level sound is
• The system is in pause mode.Press the
heard.
• Fast forward or fast reverse is performed.Press the
• Make sure the AUDIO / VIDEO output and AV IN input
• This unit is too hot. Power off the unit for 30 minutes to cool
No picture • The region number of the disc doesn't match the region number
The picture is not clear
• Clean the disc.
• The disc is scratched
• The
Severe hum or noiseis
heard.
• Clean the disc
The disc does not play. • There is no disc inside("No Disc"appears on the screen).
• Insert the disc correctly with the label side facing yourself.
• Clean the disc.
• A non-NTSC disc has been inserted.The unit and disc region
• Condensation may have formed inside the unit due to a
(
CAUSE AND REMEDY
normal play mode.
to return to normal play mode.
connections are correct.
down.
of this unit.
plugs and jacks are dirty.Wipe them with a cloth slightly
moistened with alcohol.
number are incompatible.
sudden change in temperature.Wait about an hour for it to
clean and try again.
43
)
button to return to
button