CONTENT CONTENT ....................... 1 WARNING AND PRECAUTION ..............2-3 INTRODUCTION, FUNCTIONS AND FEATURES ......... 4 PREPARATION ....................5 Positioning The TV Set ................5 Antenna And Power Connections ............5 Inserting Batteries In The Remote Control Handset ........ 5 In The Box ......................5 EXTERNAL SCHEMATIC AND INSTALLATION ........
WARNING AND PRECAUTION Read all of the instructions before operating the set. Keep these instructions well for later use. PRODUCT The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc. Do not push any objects of any kind into this unit through the cabinet slots as they could touch the current carrying parts or short-circuit parts, resulting in fire, electric shock, or damage to the unit.
Page 4
WARNING AND PRECAUTION USE ENVIRONMENT Do not install this equipment in a confined space such as a book case or similar unit. To prevent injury, this apparatus must be securely attached to the wall mount fastened on the wall. Place the set on a place that allows good ventilation. Do not use the set near damp, and cold areas, protect the set from overheating.
INTRODUCTION, FUNCTIONS AND FEATURES BRIEF INTRODUCTION: Thanks for your purchase of our digital high-definition LED television! This product with diverse functions is designed to fulfill the optimum requirements from commercial, industrial and household uses. LED television possesses the display function of both TV and PC. It features advanced picture performance, smaller in size and lighter in weight, meanwhile, consumes less power and makes no radiation.
PREPARATION Insering Batteries In The Positioning The TV Set Remote Control Handset Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space Remove the battery cover located on the back of at least 10cm free all around the set. To of the handset by gently pulling up-wards from prevent any fault and unsafe situations, please be indicated part.
EXTERNAL SCHEMATIC AND INSTALLATION Front Panel Note: The graphics are for representation only. 1.Power Button 2.Power Indicator / Remote Sensor 3.Speakers 4.Program Up/Down Button 5.Volume Up/Down Button 6.Menu Button 7.Source Button 8.Standby Button Note: This machine uses induction buttons. Operation, with the finger on the sensor area corresponding buttons at the center of a ~ 2 seconds or more re-operation;...
EXTERNAL SCHEMATIC AND INSTALLATION Back Panel Note: The graphics are for representation only. HDMI3 HDMI2 75 ANT VGA IN Uplayer2 AUDIO IN 1.VGA IN: Connect a PC via a VGA cable. 2. HDMI1\HDMI2\HDMI3:Connect HDMI input signal from signal source such as DVD. 3.
EXTERNAL SCHEMATIC AND INSTALLATION Antenna /Cable Connection There are two kinds of antenna in use. VHF TV ANTENNA TWO KINDS OF ANTENNA UHF TV ANTENNA To TV VHF/UHF No need to install adapter ANTENNA jack (Note 1) U/V MIXER COAXIAL ANTENNA Need to install adapter VHF/UHF (Note 2)
Page 10
EXTERNAL SCHEMATIC AND INSTALLATION Remote Control 1.Standby Button Press to turn the TV on or standby. 2.Picture Mode(P.P) Press to select the desired picture mode. 3.Sound Mode(S.M) Press to select the desired sound mode. 4.Zoom Button Press to the desired picture aspect ratio (Display mode).
EXTERNAL SCHEMATIC AND INSTALLATION Remote Control 17.Left/Right Buttons( / ) Press to adjust the desired item on the TV mode. 18.DTV/PVR Button Press to activate or quit PVR function in DTV mode. *19.TV/Radio Button This button is the switch of the Digital TV program and the Digital Radio broadcast.
Personal Video Recording(PVR) 1.Please insert the Media drive into the Uplayer slot before selecting record mode. 2.Select the TV program and channel you wish to record. 3.Press [DTV/PVR ] button to enter PVR mode and start recording. PVR control bar on the screen shown below.
EPG (Electronic Program Guide) "EPG" is the abbreviation of Digital Electronic Program Guide. In the digital mode, an EPG is provided by the programme providers. To access this press the EPG button on the remote control, the EPG provides programme information for the next number of hours.
MENU CONTROL This section explains the menus of your TV. Each menu is outlined and detailed to help you get the most from your TV. Basic Operation 1. Press MENU on the remote control or on the TV key panel to display the main menu. 2.
MENU CONTROL Medium: Keep the original white Warm: Red Personal : The user may customize the color temperature.(Red/Green/Blue). Cold: Blue. Display Mode To select five modes are available including: Panoramic, Zoom2, Zoom1,16:9 and 4:3. To select four modes of digital noise reduction are available including Off, Low, Middle and High.
MENU CONTROL Channel Settings Note: These settings are only available in ATV and DTV+ATV mode. Auto Search Press button to select Auto Search, then press OK CHANNEL button to enter the auto search sub menu. A Channel Search Menu will appear as below. Auto Search DTV Manual Search Channel Search...
MENU CONTROL Setup Settings OSD Language SETUP Select you desired OSD language. OSD Language English Hearing impaired Hearing Impaired This function is prepare for the Hearing Impaired, Country Sweden when the status on, you can see subtitles in the PVR File System programs.
MENU CONTROL Advanced Settings Press button to select Advanced menu, then press OK button to enter. Input password to enter, default password is ADVANCED " " 0000 . Set Password Parental Control Please enter password SW. Update(USB) Clear Cancel Free Record Limit 6Hr.
TROUBLESHOOTING NO PICTURE, NO SOUND SNOWY DOTS AND INTERFERENCE If the antenna is located in the fringe area of a 1. Check if the fuse or circuit breaker is working. television signal where the signal is weak, the 2. Plug another electrical device into the outlet to picture may be marred by dots.
SPECIFICATIONS Screen size - diagonal: 81cm Screen resolution: 1920 X1080 Audio output power (L+R): 8W + 8W Working voltage: 100-240V~ 50/60Hz Rated power consumption: Dimensions (W x D x Hmm): 777x210x560mm Net weight: 10.3Kg Environment: Working temperature: 5 C~35 C Working humidity: 20%~80% Storage temperature: -15C~45 C Storage humidity: 10%~90%...
Need help?
Do you have a question about the LED-32E60 and is the answer not in the manual?
Questions and answers