Function Menu; Pip Menu; Sound System - Skyworth LCD-26L16 User Manual

Sound System

Press the button to select a new sound standard
value in TV.
The options are DK,I,M.
NOTE: This TV factory set to "I" UK sound. If changed to
another setting whilst receiving a UK TV station this will
result in loss of sound. Change back to "I" to restore the
sound.
AUTO Tune
1. Press MENU button.
2. Press VOL+/- button and highlight the TUNING
icon.
3. Press PROG - button and highlight AUTO TUNE.
4. Press VOL+ button to start the automatic tuning
process.
5. After a few minutes the tuning will end and the
first station stored will show on the TV screen.
6. Change channels by pressing the
buttons.
Notice:
Only after finishing auto tune, channels
will be sorted. If you break the process during the auto
tune period, channels will be searched and stored,
however, the channel will not be sorted into their
correct channel order.
Manual Tuning
1. Press Menu button.
2. Press Vol+ or - button repeatedly until the TUNER
icon is highlighted.
3. Press the PROG- button and highlight Program and
change the Channel number showing to the number
that you wish to store or change the TV station showing
by pressing Vol+/- button.
4. Press Prog - button repeatedly and highlight
MANUAL TUNE.
5. Start the manual tuning process by pressing the
VOL+ or VOL- button.
6. When the desired TV station is showing press the
MENU button to return the TV to its normal operation.
The TV station will be automatically stored into the
channel number that was previously inputted.
7. To store further channel repeat above steps but this
time change the channel number in step 3 to your next
desired stored channel number 2,3, etc.
Fine Tune
" " " "
Press VOL.+ / VOL.- button to adjust the
little change of frequency.
»ù±¾²Ù×÷ »ù±¾²Ù×÷
Prog. Sort
Press Vol+ to enter.
User can set the two channel numbers that want
to swap in program 1 and program 2 ,select the
swap item, press Vol+ button to perform swapping.
"
SKIP
press the skip to enable or disable the current
program being tuned by pressing Vol+ or Vol-
buttons the choice are on and off .

Function menu

In the Function Menu, OSD languages and APS
PROG+/PROG-
related options are displayed on the screen.
Menu Language
The Language is English and Chinese.
Language(Option)
Txt
The teletext language is UK,East Euro,Greece,Cyrillic,
Arabic.
Country (Option)
Select your location country: UK / Greece / Hungary/
Italy / Norway / Netherlands / portugal / Poland /
Sweden / Slovenia / Slovakia / Turkey / Austria /
Belgium / Switzerland / Czech / Germany / Denmark/
Spain / France / Finland.
Notice: Different countries will effect the sort process
in AUTO TUNE.
Factory Reset (Option)
Press VOL+ key to delete all
program information.

PIP menu

The last Menu is PIP menu,you can select Mode,
PIP H-POS,PIP V-POS,Brightness,Contrast,Sub
Source and Swap items by pressing PRGO+/-
Buttons.
Mode
The choices are PIP and Off. Only bychoosing PIP,
you can enter PIP H-POS,PIP V-POS,Brightness,
Contrast,Sub Source and Swap items.
PIP H-POS
Press the button to change horizontal position.
PIP V-POS
Press the button to change vertical positon.
Note PIP (Picture In Picture) is used to display an
external source such as HDMI/VGA/YPbPr box at
same time as displaying the TV channel that you
are watching.
- 10 -
"
" "
" " previously stored
" "