Singer TS Instruction Manual page 13

THREADING PATH A continued...
• Raise lower looper to near internal cover
(about 3 mm). This is optimum position for
threading lower looper.
• Insert threader into left side hole(A-4).
• Hold tweezers in right hand and guide
thread through threader.
• Pull threader towards you threading looper
from back to front.
• Use tweezers to guide
between two loopers.
• Guide thread through right side hole (A-5).
• Draw thread to left.
Table of Contents
TS+ TS380+
thread.Place thread
13
Previous Page | Next Page