Data Usage For Ip Manager Server Updates - Sierra Wireless IP Manager Configuration Manual

For wireless airlink modem configuration
Table of Contents

Advertisement

Rev A Dec.08
Restrictions for Modem Name
For the Modem Name, you should use something which is 
unique but also easy to remember.  Your company name or the 
intended function of the modem are recommended.  If you 
have more than one modem and want to name them the same, 
you can append a number for each. Since it is an Internet 
domain name, there are some restrictions for the name.
Must begin with a letter or number
Can include a hyphen (‐)
Cannot contain spaces
Must be no longer than 20 characters total 
Data Usage for IP Manager Server
Updates
The IP Manager update is a small packet sent to the server 
with a response sent back to the modem.  If you have 
*IPMGRUPDATE1 or *IPMGRUPDATE2 set to any number 
but zero, the modem will send the update not only when it 
receives a new IP address but at the time interval as well.  The 
data traffic could be billed by your carrier. 
Each update is a total of 68 bytes from the modem with a 50 
byte total response from the server for a round trip update of 
118 bytes.
interval
total bytes
(minutes)
per day (24
hours)
10
16992 bytes
30
5664 bytes
Eairlink.com
As a service, Sierra Wireless AirLink Solutions maintains a IP 
Manager servers which can be used for any AirLink modem. 
*DOMAIN: eairlink.com 
*IPMANAGER1 : edns2.eairlink.com
*IPMANAGER2 : eairlink.com
interval
total bytes
(minutes)
per day (24
hours)
60
2832 bytes
500
339.84 bytes
8

Advertisement

Table of Contents
loading

Table of Contents