Legal Notices - Insignia NS-46E340A13 Important Information Manual

Outputs
Video
Analog audio/headphone
Digital audio
WiFi
Ethernet
Audio
Speakers
Power
Power consumption
Power input
Miscellaneous
OSD languages
INlink
Game Mode
ENERGY STAR qualified
Internet connectable
TV base screws
V-Chip (version 2.0)
Sleep timer
Channel labeling
VESA mount (mm)
(horizontal × vertical)
Note
The length of the wall-mount screws vary depending
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.
6
No
1 (side)
1 coaxial (side)
No
No
Number: 2
Watts per channel: 10W
On: 120W
Standby: <1W
120V/60Hz
English, French, Spanish
Yes
No
Yes
No
M4 type (12 mm length) (4 pcs.)
Yes
Yes
Yes
400 × 400
www.insigniaproducts.com

Legal notices

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits for
a class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the user's
authority to operate this equipment.
Cables
Connections to this device must be made with shielded cables with
metallic RF/EMI connector hoods to maintain compliance with FCC Rules
and Regulations.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Standard Television Receiving Apparatus — Appareil de réception
télévision ordinaire, Canada BETS-7 / NTMR-7
Dolby License Notice and Trademark Acknowledgement
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
HDMI
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Energy Star
Your Insignia TV is ENERGY STAR® qualified in the "Energy
Savings" mode. It meets strict energy efficiency guidelines set
by the U.S. Environmental Protection Agency and Department
of Energy. ENERGY STAR is a joint program of these
government agencies, designed to promote energy efficient
products and practices. Changes to certain features, settings,
and functionalities of this TV (i.e. Picture, Sound) can increase
or change the power consumption. Depending upon such
changed settings, the power consumption may exceed the
limits required for the ENERGY STAR qualification in the"Energy
Savings"mode.