Creek Audio Destiny Operating Instructions

Rds fm/am tuner

Advertisement

Quick Links

DESIGNED AND ENGINEERED
IN THE UNITED KINGDOM
Thank you for purchasing the Creek Destiny tuner. You are now in possession of a State of the Art RDS
AM/FM tuner. The Destiny is the matching tuner for the Destiny Integrated Amplifier and CD Player,
although it will also work very well with any other manufacturers' amplifiers.
The functions and operation of the Destiny tuner are deceptively simple for the many features that it offers,
all of which can be remotely controlled.

SAFETY REQUIREMENTS

Read all the instructions before connecting or operating the unit. Keep this manual so you can refer to these
safety instructions.
WATER & MOISTURE
To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. If the unit is exposed
to moisture, immediately disconnect the power cord from the wall. Take the unit to an authorised service
centre for inspection. Do not touch the unit, power cord, or plug with wet hands.

VENTILATION

You must allow 5 cm (2 inches) of unobstructed clearance around the unit. Do not place the unit on a bed,
sofa, rug, or similar surface that could block ventilation from the bottom.

HEAT

Keep the unit away from naked flames, radiators, stoves, or any other heat-producing appliances (including
amplifiers).
RACK & STANDS
Place the unit on a fixed, level surface strong enough to support its weight, such as the Creek Audio Rack. Do
not place it on a moveable device that could tip over.

CLEANING

Unplug the unit from the mains supply before cleaning. The case should normally require only a wipe with a
soft lint-free cloth.

POWER SOURCES

Only connect the unit to a power supply of the type and voltage described in the operating instructions or
specified on the rear panel of the unit.

POWER CORD PROTECTION

Connect the unit to the power outlet only with the cord supplied. Do not modify the supplied cable in any
way. Do not attempt to defeat grounding and/or polarisation provisions. Do not use extension cords. Do
not route the power cord where it will be crushed, pinched, bent at severe angles, exposed to heat, or
damaged in any way.

NON-USE PERIODS

If the unit is to be left unused for a long period of time, the power cord should be unplugged from the wall
outlet.
DESTINY
RDS FM/AM TUNER
OPERATING INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Destiny and is the answer not in the manual?

Questions and answers

Summary of Contents for Creek Audio Destiny

  • Page 1 Keep the unit away from naked flames, radiators, stoves, or any other heat-producing appliances (including amplifiers). RACK & STANDS Place the unit on a fixed, level surface strong enough to support its weight, such as the Creek Audio Rack. Do not place it on a moveable device that could tip over. CLEANING Unplug the unit from the mains supply before cleaning.
  • Page 2 DESTINY RDS FM/AM TUNER OPERATING INSTRUCTIONS SAFETY INSTRUCTIONS CONT’D DAMAGE REQUIRING SERVICE Stop using the unit immediately and have it inspected by an authorised service centre whenever: The power supply cord or plug has been damaged. Liquid has been spilled into the unit. The unit has been exposed to rain.
  • Page 3 DESTINY RDS FM/AM TUNER OPERATING INSTRUCTIONS BAND Press to toggle through FM auto/stereo, FM mono, and AM bands. FM auto/stereo is shown by the appearance Auto and Stereo at the top of the display. Auto will disappear and Mono will change to Stereo when a station is tuned in stereo and the signal strength is great enough to support it, noise free.
  • Page 4 C Tick Creek Audio Ltd reserves the right to change or modify the specification of its products without prior warning. If within two years of purchase date your Creek DESTINY tuner proves to be defective for any reason other than accident, misuse, neglect, unauthorized modification, or fair wear and tear, Creek Audio Ltd.

Table of Contents