Table of Contents
Advertisement
Quick Links
Creda Newera Profile and Profile Plus Panel Heaters
Wattage (W)
controls white
500
NPP50 75-773001
1000
NPP100 75-773002
1500
NPP150 75-773003
2000
NPP200 75-773004
The Newera Profile panel heater range is designed for wall mounting on the wall brackets supplied. It
should only be operated when in the upright position as shown in diagram C.
All models are protected against moisture ingress to IPX4 standard.
All models, except those with no controls, are fitted with a 7-day digital programmer.
Installation:
Before connecting the heater, check that the supply voltage is the same as that stated on the rating label.
When selecting the position for the heater to be installed, consideration should be given to ensure that there
are no obstructions closer than the dimensions given in Diagram C. The bracket for the heater should be
fitted in accordance with the method detailed in the associated diagrams. The heater must not be located
below a socket outlet or connection box.
Care must be exercised when fitting the heater onto the bracket. Pressure should only be applied to
the ends of the heater and not to the grille area.
The electrical installation must be carried out by a competent electrician and in accordance with the current
Electrical Wiring Regulations (BS7671) and/or local regulations.
The heater is fitted with a length of flexible cable for connection to the fixed wiring of the premises via a
suitable connection box positioned adjacent to the heater.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
A means for disconnection in all poles must be incorporated in the fixed wiring in accordance with
the wiring rules.
WARNING – THIS APPLIANCE MUST BE EARTHED
WARNING – In order to avoid overheating, do not cover the heater.
Installation and Operating Instructions
Model with
Model with controls
NPP50S 75-773011
NPP100S 75-773012
NPP150S 75-773013
NPP200S 75-773014
Model with no
silver
controls white
NP50 75-772901
NP100 75-772902
NP150 75-772903
NP200 75-772904
Dimensions
(mm)
442 x 430 x 80
680 x 430 x 80
680 x 430 x 80
852 x 430 x 80
Advertisement
Table of Contents
Related Manuals for Creda Newera NP100 75-772902
Summary of Contents for Creda Newera NP100 75-772902
- Page 1 Creda Newera Profile and Profile Plus Panel Heaters Installation and Operating Instructions Model with Model with controls Model with no Dimensions Wattage (W) controls white silver controls white (mm) NPP50 75-773001 NPP50S 75-773011 NP50 75-772901 442 x 430 x 80...
- Page 2 Bathroom Installation IMPORTANT – If the heater is installed in a room containing a bath or shower, it must be so installed that switches and other controls cannot be touched by a person using a bath or shower. Wall Mounting IMPORTANT –...
- Page 3 View of Controls Diagram D No Controls Models – 75-772901, 75-772902, 75-772903, 75-772904 and 75-772905 These models can be installed in association with a separate room thermostat control. Bracket release for cleaning For safety, the heater should be switched off at the mains before proceeding. To release the panel heater from the bracket, the rear catch must be pressed down while pulling the heater forward gently.
- Page 4 The Panel - How it works A heating element within the metal case warms its front face for direct radiation into the room and a gentle circulation of warm air around the room. The built-in thermostat with its adjustment knob located behind the controls door, controls the room temperature by sensing this from the air passing upwards through the panel.
Need help?
Do you have a question about the Newera NP100 75-772902 and is the answer not in the manual?
Questions and answers