Snmp - Cradlepoint CBA750 Series User Manual

CBA750 | USER MANUAL Firmware ver. 1.9.0
CRADLEPOINT

6.6 SNMP

The SNMP Settings section allows you to enable or
disable the SNMP protocol over the LAN, WAN, or
VLAN interfaces. For security, you can also set the
community names for both Get and Set SNMP
requests.
SNMP is disabled by default on all three interfaces.
The Default Port is 161.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 56