Hitachi CP-X260 User's Manual And Operating Manual page 42

OPTION Menu
OPTION Menu (continued)
Item
SERVICE
42
Selecting this item displays the SERVICE menu.
the ENTER button on the remote control to execute the item.
FAN SPEED AUTO ADJUST
FACTORY RESET
FAN SPEED
fans. The HIGH is the mode for use at highlands etc. Note that the
projector is noisier when the HIGH is selected.
HIGH NORMAL
AUTO ADJUST
When DISABLE is selected, the automatic adjustment feature is
disabled, although rough adjustment is automatically performed
depending on the basic setting.
ENABLE DISABLE
• Depending on conditions, such as input image, signal cable to the
projector, environment around the projector, etc., the automatic adjustment
may not work correctly. In such a case, please choose DISABLE to
disable the automatic adjustment, and make adjustment manually.
GHOST
2.
FILTER MESSAGE
50h 100h
After selecting "50h", "100h", "200h", or "300h", the message
"REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK"
will appear after the timer reaches the interval time set by the menu.
55)
(
message will not appear.
•
the internal temperature will rise, which could cause malfunction, or
reduce the lifetime of the projector.
• It is recommended to choose "100h" in general. Please be careful
with the operating environment of the projector and the condition of
chosen.
KEY LOCK
TURN ON is selected, the buttons on the projector except the
STANDBY/ON button are locked.
TURN ON TURN OFF
• Please use to avoid a mischief and touching accidentally. This
function does not have any effect on the remote control.
Description
GHOST
INFORMATION
200h 300h TURN OFF
FILTER MESSAGE
REMOTE FREQ.
KEY LOCK