Setting The Clock Automatically; Setting The Clock Manually; Clock Dimmer; Setting The Sleep Timer - Hitachi AX-M81 Instruction Manual

Setting the Clock Automatically

Tune into a RDS station and wait for a few minutes. To confirm, press the clock button.

Setting the Clock Manually

The built-in clock shows the time on the display.
1. Press the clock button (CLOCK), hour indicator will blink.
2. Set the hour with the tuning backward button (TUNING-) or tuning forward button (TUNING+).
3. Press the clock button (CLOCK), minute indicator will blink.
4. Set the minute with the tuning backward button (TUNING-) or tuning forward button (TUNING+).
5. Press the clock button (CLOCK), the built-in clock starts operating and the seconds start count-
ing from 0.
Caution:
* The operating time of every step shouldn't be longer than 3 seconds or it will return to the time
display.
* If there is a power failure or the systems power is turned off, the clock looses its setting.

Clock Dimmer

This unit has three brightness levels for you to adjust the clock display. You only need to press the
clock dimmer button (CLK DIM) on the remote control, then you can choose the proper lighting to use
this system at different times (in standby mode).

Setting the Sleep Timer

Use the sleep timer to turn the system off after a certain number of minutes when it is playing. By
setting the sleep timer, you can fall asleep to music and know that your system will turn off by itself
rather than play all night.
1. Play a CD or tune in to the desired station.
2. To set the sleep timer press the sleep button (SLEEP) on the remote control repeatedly, it
changes the number of minutes shown on the display in this sequence:
- -
After setting the number of minutes for the sleep timer, the display will return to the display as
before setting the sleep timer.
The system is now set to turn off after the number of minutes you set.
To confirm the sleep time
When the sleep button (SLEEP) on the remote control is pressed once, the remaining sleep time is
displayed. Wait for a second until the display returns to the original display.
To cancel the sleep timer setting
Repeatedly press the sleep button (SLEEP) on the remote control until the "00" is displayed.
Turning off the system also cancels the sleep timer.
...
10 20 80 90 00
- 12 -