Advertisement
ASSEMBLY
• Position the back grille against the motor.
• Use the screw fix the main body.
• Unclose the transparent sticker on back of the fan blade, put the steel
washer/steel ring into the pole of back of fan blade.
• Position the front grille against the rear grille so that the holes in the rims
that accept the small nut and bolt are in line
NOTE: THERE IS A STEEL RING WHICH FIXES THE PRO FELLER
BLADES IN PLACE. DO NOT RELEASE IT.
SPECIAL NOTES
• Do not insert finger or any object into the grill.
• Do not unplug by pulling on the wire.
• Unplug the fan when not in use
• Do not place the fan near flame or other source of heat motor's axis
propeller blade.
• Do not use near water prolect from rain
• Do not use gasoline or any volatile chemicais to clean the fan.
Advertisement
