VTech Winnie the Pooh Bounce n Learn Honeypot User Manual page 5

BATTERY INSTALLATION
1. Make sure the unit is OFF.
2. Locate the battery cover at the bottom
of the unit.
3. Install 4 new "AA" (UM-3/LR6)
batteries as illustrated. (The use of new,
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover.
BATTERY NOTICE
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision
(if removable).
• Different types of batteries or new and used batteries are not to be mixed.
• Only batteries of the same or equivalent type as recommended are to be
used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended number of
power supplies.
• Do not dispose of batteries in fire.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
3