Installing The Tv On A Wall - Vizio E291i-A1 User Manual

3. Insert the two(2) included rubber feet over the screws as
shown and press firmly to secure them.
When you are finished, place the TV on a stable, level
surface.

Installing the TV on a Wall

To mount your TV on a wall, you will need a wall mount. Consult
the information below to find the appropriate mount for your TV
model:
Installing a TV on a wall requires lifting. To prevent
injury or damage to the TV, ask someone to help you.
Screw Size:
Screw Pitch:
Screw Length:
Hole Pattern: 100mm (V) x 100mm (H) 100mm (V) x 100mm (H)
Be sure the mount you choose is capable of supporting the
weight of the TV. After you have determined that you have the
correct mount for your TV, you can begin the installation.
To install yovur TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface.
Be sure the surface is clear of debris that can scratch or
damage the TV.
3. Remove the base by loosening and removing the screws.
4. Attach your TV and wall mount to the wall, carefully following
the instructions that came with your mount.
Use only with a UL-listed wall mount bracket rated for the
weight/load of this TV. See Appendix B - Specifications for the
weight of this TV.
5
e241i-a1 e291i-a1
M4 M4
0.70mm 0.70mm
10mm 12mm
1