Advertisement
Cable Connections
TV Function
Figure. Cable connections
Preparations
1. Connect the antenna to the antenna jack on the unit side panel.
2. Connect the power supply cord. If the player is in standby mode, press the POWER button to turn
on the power.
3. Press the MODE button to select the TV mode.
VGA
R
L
IN
VIDEO
V
P-SCAN
OUT
AUDIO OUT
E
4. Press CH buttons on the remote control, or use the number buttons directly, to select the channel
DC
PC
D
L
R
I
12V S-VIDEO
Y
Cb
Cr AUDIO
O
AUDIO IN
TV ANT
that you wish to view.
Picture Parameters setup
COAXIALT
1. Press the LCD SETUP button once on remote control to access picture parameters setup menu, the
screen will display as below:
ADAPTER
DVD OR VCR
2. Press up/down direction button, it appears in succession SYSTEM setup menu, FUNCTION setup
AC INPUT
menu, CHANNEL setup as well as EXTRA setup menu. Press OK button to confirm .
3. To exit the menu, press LCD SETUP button again, or press direction button to highlight the EXIT
and then press OK to confirm
IMAGE Setup
For your reference:
1. Connect TV RF sources to antenna port. TV RF signals include: receiving antenna/CATV net. You
can use 75
coaxial cable to connect outdoor antenna.
2. Connect the earpiece to the "phone" port.
3. Connect audio sources (including DVD/VCR/CAMCORDER/PC) to the proper audio input ports "L"
1. Press up/down direction button to highlight the Image setup menu. And press OK to confirm .
and "R" by RCA cable.
2. Press up/down direction button to highlight the desired option from Contrast/Brightness/Saturation/
4. Connect video sources (DVD/VCR/CAMCORDER) to the "VIDEO" or "S-VIDEO" port by RCA cable
Sharpness/Hue. Press OK to confirm.
or S-VIDEO cable.
5. When used as computer screen, the PC port should be connected to computer display output by 15-
3. Press left/right button to make adjustment. And press OK to confirm.
4. To exit the Image setup menu, highlight Exit and press OK to confirm.
pin D-SUB signal cable.
6. Insert the AC power to the DC adapter, then connect 12v input port of the Display to its' DC output
port.
NOTE: When in component mode, the Hue item is unavailable.
9
TV Function
SYSTEM Setup
SYSTEM
PICTURE
AUDIO
EXIT
EXIT
1. Press up/down direction button to highlight the System setup menu. And press OK to confirm.
2. Press up/down direction button to highlight the desired option from Picture/Audio.
IMA GE
Press OK button to confirm.
Picture: Press up/down direction button to select the item from
CONTRAST
BRIGHTNESS
Dynamic/Normal/Soft.. Press OK to confirm.
SATURATION
Audio:
Press up/down direction button to select the item from
SHARPNESS
HUE
Standard/Classic/Rock/Jazz/Pop. Press OK to confirm
EXIT
EXIT
3. To exit system setup menu, highlight EXIT and press OK button.
FUNCTION Setup
FUNCTION
NOISE REDUCTION
INPUT SOURCE
EXIT
IMA GE
CONTRAST
EXIT
BRIGHTNESS
SATURATION
1. Press direction button to highlight the Function menu. And press OK button to confirm.
SHARPNESS
HUE
2. Press direction button to highlight the desired option from Noise Reduce/input Source,
EXIT
EXIT
and press OK to confirm the selection.
Noise Reduction: press direction button to choose from ON/ OFF, and press OK to confirm.
If ON is selected, the image will be shown clearly, but with unclear background.
If OFF is selected, both image and background are displayed normally.
Input Source: a certain input mode has been tickled to indicate current situation
Press direction button to change the desired mode from DVD/VGA/VIDEO/S- VIDEO/TV/
COMPONENT and press OK to confirm.
3. To exit function setup, highlight EXIT and press OK button.
10
11
TV Function
TV Function
CHANNEL Setup
CHA NNEL
AUTO SEARCH
ANTENNA
TUNING
SKIP
EXIT
EXIT
1. Press direction button to highlight the Channel setup menu. And press OK button to confirm .
2. Press direction button to highlight the desired option and press OK to confirm the selection.
Refer to table 1 for detailed description.
(Table 1)
Item
Selection
Instruction
Auto
Press up/down direction button to highlight Search
Search the channels from low to high,
Search
Press OK to start autosearch
and reserve the channels auto-
matically. The reserved channel will
Search:
be displayed on screen. Press OK
17
to stop searching.
PRG:
1
Antenna
Press up/down button to select Air or Cable.
You can select an outer antenna or the
cable TV
Tuning
Press right direction button to increase fine tune.
In order to improve the picture
Press left direction button to decrease fine tune.
and sound, you can use the function to
adjust the received program, and then
press OK to reserve it.
Skip
Press up/down direction button to select ON or OFF. Set "ON" to skip the present program.
It will not be displayed .
To restore to normal , set it to "OFF"
NOTE:
The program will be skipped when the signal is weak.
EXTRA Setup
EXTRA
Closed Caption
P, Lock
Exit
EXIT
1. Press direction button highlight the Extra setup menu and press OK to confirm.
Closed Caption: if the Closed Caption is selected, press direction button to select an option :
CC1
CC2
CC3
CC4
T1
T2
T3
T4
OFF
If OFF is selected, the caption will be hided.
NOTE:
The Closed Caption operation is not allowed on some movies and TV programs.
12
TV Function
P. Lock: If the P. Lock is selected, input a 4-digit code to enter the P Lock menu. (Enter 1234 if it is the
AV Function
first use.) If the wrong code is input, the P. LOCK menu will not appear on screen.
The player has AV functions. You can enjoy programs from external input sources such as recorder,
P. Lock
vidicon, satellite receiver or game player etc.
Connect the external AV signal source to S-VIDEO or VIDEO jack, and then turn on the power of the
TV R ating
MPAA R ating
unit, and press the MODE button to shift to the VIDEO / S-VIDEO /COMPONENT mode.
Picture Parameters setup (S-VIDEO/COMPONENT MODE)
New Code
Exit
1. Under the S-VIEDO or COMPONENT mode, press the LCD SETUP button once on remote control
EXIT
to access picture parameters setup menu, the screen will display as below:
2. To exit the Extra setup menu press up/down direcition button to highlight Exit, and press OK to
confirm.
P Lock:
Some movies and TV programs include signals that classify the contents of the program. The P. Lock
2. Press up/down direction button, it appears SYSTEM setup menu and FUNCTION setup menu.
control feature in the TV detects the signal and blocks the programs according to your selections.
3. To exit the menu, press LCD SETUP button again, or press direction button to highlight the EXIT
and then press OK to confirm
The default password to enter the system is 1234.
IMAGE Setup
To change the password, please select the New Code item, and enter your desired 4-digit code.
Please keep a copy of it in a safe place. If the password is lost, the defaults setting will not be reverted
to the original password.
There are two Rating systems: TV for broadcasters and MPAA for movies.
1. Press up/down direction button to highlight the Image setup menu. And press OK to confirm.
MPAA Rating
TV Rating
2. Press up/down direction button to highlight the desired option and press OK to confirm.
NR: Unrestricted
TV-MA:Mature audience only
TV-14: Not intended for ages under 14
X: For adults only
3. Press left/right button to make adjustment. And press OK to confirm.
NC17:Not intended for ages under 17
TV-PG:Parental guidance suggested
R: Restricted
4. To exit the Image setup menu, highlight Exit and press OK to confirm.
TV-G:General audience
PG-13:Not intended for ages under 13
TV-Y7:For children age 7 and above.
PG:Parental guidance suggested
NOTE: When in component mode, the Hue item is unavailable.
TV-Y:All children
G:General audience
There are sub-categories within these ratings. As the rating increases, so does the intensity of the sub-
SYSTEM Setup
category.
(I.e.) Under PG, V would be moderate violence. Under MA, V would be graphic violence.
D- Suggestive dialogue
L- Indecent language
S- Sexual situations
V- Violence
1. Press up/down direction button to highlight the System setup menu. And press OK to confirm.
2. Press up/down direction button to highlight the desired option and press OK to confirm.
Picture: Press up/down direction button to select the item from
Dynamic/Normal/Soft.. Press OK to confirm.
Audio:
Press up/down direction button to select the item from
Standard/Classic/Rock/Jazz/Pop. Press OK to confirm
3. To exit system setup menu, highlight EXIT and press OK button.
13
AV Function
IMA GE
CONTRAST
BRIGHTNESS
SATURATION
SHARPNESS
EXIT
HUE
EXIT
IMA GE
CONTRAST
BRIGHTNESS
SATURATION
SHARPNESS
EXIT
HUE
EXIT
SYSTEM
PICTURE
AUDIO
EXIT
EXIT
14
Advertisement
