Unpacking And Setup - Emerson Research AC100 Owner's Manual

P R E PAR AT I O N F O R U S E
UNPACKING AND SET UP
• Remove the unit from the carton and remove all packing material from
the unit. We suggest that you save the packing material, if possible, in
the unlikely event that your unit ever needs to be returned for service.
The original carton and packing material is the only safe way to pack
your unit to protect it from damage in transit.
• Remove any descriptive labels or stickers on the front or top of the
cabinet. Do not remove any labels or stickers from the back or bottom
of the cabinet.
• Note the serial number on the bottom of your unit and write this number
in the space provided on Warranty Page of this manual.
• Place your clock on a level surface such as a table, desk or shelf,
convenient to an AC outlet, out of direct sunlight, and away from sources
of excess heat, dirt, dust, moisture, humidity, or vibration.
• Unwind the AC power cord and extend it to its full length.
AC100_072806.p65
3
3 28/7/2006, 10:32