Table of Contents
Advertisement
CNWR-811P User Guide
Refresh
Connection Log Messages
Message
Connect on
Demand
Manual connection
Reset physical
connection
Connecting to remote
server
Remote Server
located
Start PPP
PPP up successfully
Idle time-out reached
Disconnecting
Error: Remote Server
not found
Error: PPP Connec-
tion failed
Error: Connection to
Server lost
Error: Invalid or
unknown packet type
Contact this device and update the Log data.
Description
Connection attempt has been triggered by the "Connect on De-
mand" setting.
Connection attempt started by the "Connect" button.
Preparing line for connection attempt.
Attempting to connect to the the ISP's server.
ISP's Server has responded to connection attempt.
Attempting to login to ISP's Server and establish a PPP connection.
Able to login to ISP's Server and establish a PPP connection.
The connection has been idle for the time period specified in the
"Idle Time-out" field. The connection will now be terminated.
The current connection is being terminated, due to either the "Idle
Time-out" above, or "Disconnect" button being clicked.
ISP's Server did not respond. This could be a Server problem, or a
problem with the link to the Server.
Unable to establish a PPP connection with the ISP's Server. This
could be a login problem (name or password) or a Server problem.
The existing connection has been lost. This could be caused by a
power failure, link failure, or Server failure.
The data received from the ISP's Server could not be processed.
This could be caused by data corruption (from a bad link), or the
Server using a protocol which is not supported by this device.
22
Advertisement
Table of Contents
