Advertisement
OPERATION (CONTINUED)
TO PLAY A TAPE
1
Lift up the cassette door and insert
a prerecorded tape. Close the
cassette door. Set the Function
switch to the TAPE position.
3
To stop the tape before it reaches
the end, push the STOP button.
TO FAST FORWARD A TAPE
1
2
1 1
TROUBLESHOOTING GUIDE
Should this unit develop a problem, check the following before seeking service.
POSSIBLE
SYMPTOM
CAUSE
GENERAL
Power does
Batteries are weak,
not come on.
dead or not inserted
correctly.
RADIO
No sound.
Function switch not
set to RADIO position.
VOLUME control at
minimum position.
Noise or sound
FM–Interference.
distorted.
CASSETTE
No sound.
Function switch not
set to TAPE position.
VOLUME control at
minimum position.
Sound distorted.
Dirty head.
2
1
Push the PLAY button
playback and adjust the VOLUME
control
as desired.
AUTOMATIC STOP
This cassette player has a built-in
Automatic Stop System that stops
the tape when it reaches the end in
the Play mode.
TO FAST FORWARD A TAPE
To rapidly advance the tape, push
the Fast Forward button
rapidly advance the tape while in
the play mode, push the STOP
button
before pressing the Fast
Forward button
.
4
POSSIBLE
SOLUTION
Insert batteries
properly or replace with
fresh batteries.
Set Function switch
to RADIO position.
Turn the VOLUME
control up.
Turn the unit for
best reception.
Set Function switch to
TAPE position.
Turn the VOLUME
control up.
Clean head.
5101 Statesman Drive,
Irving, TX 75063.
6
CASSETTE TAPE USAGE
Longer length tapes of 45 (C-90) and
60 (C-120) minutes of playing time on
each side are not recommended.
These tapes use thinner material and
2
have a greater chance for malfunction
such as tape spillage from the cassette,
internal binding and tape tearing. Use
to start
only high quality tapes. If there is any
slack in the tape, remove it before
inserting the cassette. To do so, place a pencil in one of the hubs and
rotate it until the slack is taken up.
CARE AND MAINTENANCE
Clean the tape head, capstan and pinch roller using a cotton swab
slightly moistened with alcohol. Avoid scratching the head surface.
To clean the unit housing, use a soft cloth slightly dampened with
water and wipe dry.
. To
CAUTION: Never use chemicals such as benzene or paint thinner for
cleaning, otherwise the case may become deformed or discolored.
Emerson Radio Corp. warrants manufacturing defects in original
material, including original parts and workmanship, under normal use
and conditions, for a period of ninety (90) days from the date of original
purchase in the U.S. With your dated proof of purchase, we will
provide repair service at no charge for labor and parts at an authorized
Depot Repair Facility, or replace the product in our discretion. For
repair or replacement, pack your unit in a padded box, enclose your
check or money order payable to Emerson Radio Corp. in the amount
of $5.00 (not required by California residents) to cover shipping and
handling costs, and enclose a copy of your proof of purchase. Send
your unit to:
This warranty does not cover damage from negligence; misuse; abuse;
accident; failure to follow operating instructions; commercial use;
rental; repairs by an unauthorized facility; or products purchased, used,
serviced or damaged outside of the United States.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
STATE.
EMERSON
PART NO.: 21-2058
607-02
CARE AND MAINTENANCE
Cotton Swab
Capstan
Pinch Roller
Head
5
LIMITED WARRANTY
Emerson Radio Corp.
5101 Statesman Drive,
Irving, TX 75063.
Printed in China
7
AU898H
Advertisement
