Image Menu - Hitachi CP-RX60 User Manual

Multifunctional settings

IMAGE menu

With the IMAGE menu, items shown in the table below can
be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Item
ASPECT
OVER SCAN
V POSITION
H POSITION
H PHASE
30
Using the buttons ▲/▼ switches the mode for aspect ratio.
At a RGB signal
4:3  16:9  NORMAL
At a video signal / no signal
4:3  16:9
• The NORMAL mode keeps the original aspect ratio of the signal.
• At a HDTV component video signal of 1125i (1080i) or 750p (720p),
this item can't be chosen.
• Performing the automatic adjustment initializes the aspect ratio
setting.
Using the buttons ▲/▼ adjusts the over-scan ratio.
Large (It reduces picture)  Small (It magnifi es picture)
• This item can be chosen only at a video signal.
• When this adjustment is too large, certain degradation may appear
at the frame area of the picture. In such a case, please adjust small.
• The number displayed on the menu during this adjustment is jest
for your reference, and might not be exact display ratio.
Using the buttons ▲/▼ adjusts the vertical position.
Up  Down
Using the buttons ▲/▼ adjusts the horizontal position.
Left  Right
Using the buttons ▲/▼ adjusts the horizontal phase to eliminate
fl icker.
Right  Left
• This item can be chosen only at a RGB signal or a component
video signal (except 525i (480i) and 625i (576i)).
Description
MENU [ RGB ] :SELECT
PICTURE ASPECT 4:3
IMAGE OVER SCAN 95
INPUT V POSITION 25
SETUP H POSITION 142
SCREEN H PHASE 16
OPTION H SIZE 1344
EASY MENU AUTO ADJUST EXECUTE