Figure 4-20: Wireless Security - Radius Using Eap-Tls Screen; Figure 4-21: Wireless Security - Radius Using Peap Screen - Linksys WPC54GX4 User Manual

Wireless-G Notebook Adapter with SRX400
RADIUS
RADIUS uses the security of a RADIUS server. (This should only be used when a RADIUS server is connected to
the Router.) It offers two authentication methods, EAP-TLS and PEAP. Select one of these methods and follow
the appropriate instructions below.
EAP-TLS
Login Name - Enter the login name of your wireless network.
Server Name - Enter the name of the authentication server (this is optional).
Certificate - Select the certificate you have installed to authenticate you on your wireless network. If you
want to use any certificate, keep the default setting, Trust Any.
PEAP
Login Name - Enter the login name of your wireless network.
Password - Enter the password of your wireless network.
Server Name - Enter the name of the authentication server (this is optional).
Certificate - Select the certificate you have installed to authenticate you on your wireless network.
Inner Authen. - Select the authentication method used inside the PEAP tunnel.
Click the Next button to continue to the Confirm New Settings screen or the Back button to return to the
previous screen.
Chapter 4: Setting Up and Connecting the Wireless-G Notebook Adapter with SRX400
Setting Up the Adapter
Figure 4-20: Wireless Security - RADIUS Using EAP-TLS
Screen
radius (remote authentication dial-in user service): a
protocol that uses an authentication server to control
network access.
Figure 4-21: Wireless Security - RADIUS Using PEAP
Screen
16