Philips Calculite C4T4GD-MHT4R Specification

Calculite
Page 1 of 4
Ceiling Cutout: 5 1/8" (130 mm) Dia.
For complete fixture order: Trim Kit (Glasslite) + Upper Reflector + Frame-In Kit. Sold Separately
Glasslite Trim Kit + Upper Reflector
C4T4GD + MHT4RS (Spot Upper Reflector)
MHT4RNF (Narrow Flood Upper Reflector)
MHT4RF (Flood Upper Reflector)
Features
1. Upper Reflector: Specular faceted aluminum; select 12° Spot (MHT4RS) 25°
Narrow Flood (MHT4RNF) or 40° Flood (MHT4RF); interchangeable.
2. Glasslite Trim Kit: One piece borosilicate etched glass.
3. Lamp Holder: Unitized construction assures proper alignment of lamp to
optics for consistent optical performance.
4. Socket Housing: Galvanized steel, pre-wired with G8.5 pulse rated
socket. Snaps onto yoke for secure attachment without tools; unitized
construction assures proper alignment of lamp to optics for consistent optical
performance.
5. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish. Removable cover
for top re-lamping.
6. Frame Vertical Adjustment Mechanism: Accommodates mounting to
virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
7. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
8. Retention Springs: Rust resistant springs secure trim for quick, tool-less
installation.
9. Ballast / Cover Assembly: Accessible from below and removable without
tools for inspection and ballast replacement .
10. Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90° C through branch circuit conductors. Allows inspection from below.
11. Optional Accessory Holder: Catalog # CAH4 Sold separately; die-formed
steel, matte black finish, slide-in installation. Accepts up to two 3 3/4" dia.
media.
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2009 Philips Group • B0609
HID Lensed Downlight
®
Frame-In Kit
C4A20BT5PGJ5E1 Electronic 120V
C4A20T4GU65EU Electronic 120V/277V
C4A20T4EU Electronic 120V/277V
C4A39T4GU65EU Electronic 120V/277V
C4A39T4E1
Electronic 120V
C4A39T4E2
Electronic 277V
C4A70T4E1 Electronic 120V
C4A70T4E2 Electronic 277V
Features (continued)
12. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
Electrical
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high power factor, T.H.D.
<15%, thermally and transient protected, RMI/RFI complies with FCC Part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating "A",
-5° F minimum starting temperature, Type 1 Outdoor rating.

Options and Accessories

Chicago Plenum: Consult Factory.
Labels
UL (Suitable for Wet Locations), CSA, I.B.E.W.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
C4T4GD-MHT4R
4 1/2" Aperture, T4 Ceramic Metal Halide, Glasslite
Lamping (Ceramic Metal Halide)
22W Philips MiniMasterColor
20W GE ConstantColor
20W T4.5
39W Philips MiniMasterColor
39W T4.5
39W T4.5
70W T4.5
70W T4.5
install insulation above nor within 3" (76mm) of any part of the luminaire.
Ballast ANSI Code Voltage
20W MH M156 120/277
39W MH M130 120/277
70W MH M139 120/277
Max. Amps Input Watts
0.21/0.10 23
0.39/0.17 44
0.67/0.29 78
Type: