Starting The Monitor - eMachines Flat Panel Monitor User Manual

6

Starting the monitor

To start the monitor:
1
2
3
4
5
12
Using Your eMachines Flat-Panel Monitor
Turn on the speaker bar by rotating the power/volume knob clockwise. The green LED to
the left of the power button is lit when power has been correctly connected and the speaker
bar has been turned on.
Press the power button on the front of your monitor. The power LED on the power button
turns on. (The appearance of your monitor may vary from that shown.)
Turn on your computer.
After your computer is running, the power LED on the monitor's power button should be
blue. Allow about 10 seconds for the display image to appear. If the power LED is not blue
or you do not see a display image, check the connections. For more troubleshooting
information, see "Troubleshooting" on page
Adjust the tilt of the monitor for the best viewing angle.
After you see the Windows desktop, press the Auto button on the right side of the monitor
to automatically adjust your display image to the ideal settings.
Use the on-screen display (OSD) to adjust other monitor settings. For more information, see
"Adjusting monitor settings" on page
Important
When adjusting the monitor settings, always press the Auto button before
entering the OSD. This will automatically adjust the display image to the ideal settings
for the current screen resolution.
Power button
20.
13.