Philips Tangent FXS Specification

Page 1 of 2
3/16 in
6
3/16 in
Ordering Information
Catalog No.
FXS04
FXS08
FXS12
FXS52
FXS53
FXS54
FXS55
FXS67
FXS68
FXS84
FXS86
FXT08
FX100
Features
Tangent Suspended Track and Truss Track are a one-circuit electrical distribution
system designed to support and supply all Tangent lighting units in a flexible
manner. The track can be installed individually in straight runs or in a variety of
patterns using the appropriate connectors. The track may also be field bent by
hand or with an FX100 bending tool into curves with a minimum radius of 3'. All
track lengths can be field cut.
1. Tangent Suspended Track: Anodized aluminum with a clear protective
coating
2. Truss Track: Anodized aluminum with a clear protective coating
3. Insulating Liner: Clear polycarbonate; houses conductors
4. Conductor (2): Tin plated copper
5. Polarity Dimple: Identifies the 120V line conductor
6. End Cap: Silver painted polycarbonate
Finish
Tangent Suspended Track and Truss track are anodized aluminum with a clear
protective coating. Connectors and end caps are painted in a coordinating silver
finish. All painted finishes are baked enamel.
Lightolier is a Philips group brand
143 5/8 in [3648 mm]
5
95 5/8 in [2429 mm]
2
1
Finish Description
Clear Anodized 4' Tangent Suspension Beam Track
Clear Anodized 8' Tangent Suspension Beam Track
3/8 in [9 mm]
Clear Anodized 12' Tangent Suspension Beam Track
1 3/8 in [34 mm]
4
Silver Suspension Variable Angle Coupler, Mechanical Only
Silver Suspension Variable Angle Coupler, Electro/Mechanical
Silver Suspension Mini Coupler, Electro/Mechanical
Clear Anodized Suspension Mini Coupler, Mechanical Only
3/8 in [9 mm]
Silver Tangent Suspended Power Feed Canopy, 10'
Silver Tangent Suspension Non-Powered Cable Kit, 8'
Silver Tangent Suspension 18" Stem Kit
Silver Tangent Suspension 48" Stem Kit
Clear Anodized 8' Tangent Suspended Truss Track
n/a Bending Tool
Tangent
3/16 in
47 5/8 in [1210 mm]
95 5/8 in [2429 mm]
1
6
1 3/8 in
[34 mm ]
3
Electrical
Capacity is 20 amps at 120 volts, 60Hz per branch circuit. The track units are
polarized and continuously grounded throughout. Electrical conductors are
contained in the polycarbonate extrusion. Track is intended for wiring to branch
circuit building wire with ground. All wiring must be in accordance with National
and Local Codes.
Labels
cULus
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • D1008
Track Lighting System
™
95 5/8 in [2429 mm]
2
3/16 in
1
3/16 in
1 3/8 in [34 mm]
4
3/8 in [9 mm]
Track Mountings
Tangent Suspended Track and Suspended
Truss Track may be suspended with stems at a
maximum of 6' on center. Additional suspension
points may be necessary when creating patterns
or for balancing loads.
Type:
FXS
Suspension Track
FXS04
FXS08
FXS12
FXS52
FXS53
6
FXS54
6
FXS55
FXS67
FXS68
FXS82
FXS84
FXS86
FXT08
FX100
3