Connecting The Set-Top; Connecting To A Tv - Cisco Z870DVB User Manual

Connecting the Set-Top

To connect your set-top to your entertainment devices, complete these steps.
1
Connect your TV to the set-top. (See connection diagram.)
Plug the set-top and the TV into a power source that is not controlled
2
by a wall switch.
3
Do not turn on the set-top or TV yet.
Wait for the green LED to illuminate. It may take several minutes for
4
the set-top to receive the latest software, programming, and service
information.
5 Press POWER on the remote control.
The fi rst time you turn on the set-top, the Setup Wizard will start.
Read and follow the directions on the screen to get your set-top
6
ready for use.
8

Connecting to a TV

WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or
disconnecting any device cables to the set-top.
Back of Z880DVB
Ethernet
AC IN
100-240V
50-60Hz 32W
Cable In TV Out
Cable
Input
Back
of TV
To Power
Receptacle
CABLE IN
Y Pb Pr
L R V
L R SPDIF SIM Card
AUDIO VIDEO
IN IN
L R
AUDIO AUDIO VIDEO VIDEO
OUT OUT OUT OUT
T13969
9