Advertisement
Maintenance (Continued)
Assembly after maintenance
1. Bearing in mind the following points, assemble the parts following the
sequence for their removal in reverse.
•
Attach the air filters to the magic tape on the Lossnay core(s).
•
Arrange the Lossnay core with the air filter side downward.
Specifications
*
The values given in the table for the noise level reflect the levels measured at a position 1.5 meters immediately below the unit in an anechoic
chamber.
*
The noise at the air outlets is the values at a 45° angle, 1.5 meters in front of the unit.
*
The above values apply during Lossnay ventilation when the fan speed is set to high speed.
*
The values for 150 and 200 type main unit outlet noise show in the case of 1 supply air duct.
After-sales servicing
Consult with your dealer about the after-sales services provided for this
Lossnay product.
4
2. Press the filter button on the remote controller (PZ-41SLB-E) two
times in succession.
(This clears the Lossnay's operating time cumulative data.)
Relevant button
FILTER
(Press twice)
If you hear strange sounds, if no air is blown out or if some other
trouble occurs, switch off the power and contact your dealer.
Consult with your dealer concerning the cost of inspection or
repair work.
Relevant display items
FILTER
Advertisement
