Matsui M22LID618 Operating Instructions Manual page 11

Colour television with remote control
Table of Contents

Advertisement

Headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones (optional).
Component Video Inputs (YPbPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component
output. Connect the component video cables between the COMPONENT VIDEO INPUTS on
on the TV and the component video outputs of your device. While connecting, be sure that the
letters on your TV, "Y", "Pb", "Pr" correspond with your device's connectors.
Note that "Y" input also functions as CVBS Video In jack.This means that you can connect
devices such as a camcorder to your TV by using CVBS Video In jack. Connect the video cable
between the CVBS Video In socket on the TV and the VIDEO OUT jack on your device to make
such a connection.
PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that
connects to the TV via YPbPr sockets.
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your
PC to enable PC audio.
Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device
to enable component audio.
RF Input connects to an antenna or a cable.
Note that if you use a decoder or a media recorder, you should connect the aerial cable
through the device to the television with an appropriate antenna cable, as shown in the
illustration below.
SCART inputs or outputs for external devices.
Connect the SCART cable between SCART sockets on TV and SCART socket on your external
device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART sockets, the TV will automatically
switch to AV mode.
CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you
subscribe to. For more information, see "Common Interface" section.
Disc Loader
PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
00-ENG-01-TV-2297W-UK IDTV-1165UK-VGA-10057841.p65
- 10 -
10
25.06.2008, 09:06

Advertisement

Table of Contents
loading

Table of Contents