POWER SUPPLY
USING HOUSE CURRENT
Before use, check that the rated voltage
of your unit matches your local voltage.
USING BATTERIES
Disconnect the AC power cord from the AC inlet of the
unit. Battery power is cut automatically by the cord while
it is connected.
battery door
FOR BETTER RECEPTION
FM
TURN ON / OFF THE SYSTEM
Press the ON/
STANDBY button to turn the audio on. To change the audio mode between,
CD , U DISK and TUNER press FUNTION button while the power is on. the audio
mode is displayed.
Power will be cut off automatically when CD, MP3 and USB functions are in stop mode for 15 minutes.
ADJUSTING THE SOUND
VOLUME
VOLUME
TUNER OPERATION
Tuning a RADIO Station
1. Press FUNCTION button repeatedly
until "TUNER" is shown.
2. Press the BAND/FOLDER button
to select the desired frequency band (FM or AM).
3. Press the TUNE + /NEXT or
TUNE - /BACK button as many times
as required to tune in to the
desired station.
4. Press and hold the TUNE +/NEXT or
TUNE - /BACK button for more than 1 second,
scanning starts automatically and tuner stops at the
5. To stop the auto tuning, press the TUNE +/NEXT or
TUNE - /BACK button again.
FOR PRIVATE LISTENING
When headphones are plugged in, the speakers are automatically disconnected.
6
To AC socket
When the volume decrease, or the sound distorts, replace
all of the batteries with new ones.
Insert 8 UM-2 ( size C ) batteries.
AM
Selecting FM Stereo/Mono mode
1. To select FM stereo/mono mode, press ST/MONO
button on the remote control.
2. The "STEREO" icon will be displayed when receiving
a stereo broadcast.
3. To select mono mode, press ST.MONO button again.
4. The "STEREO" icon will never turn on in
FM MONO mode.
To AC outlet