Advertisement
PC Mode
This enables you to connect your home computer, or laptop computer, to your TV to use the plasma
important note on Installation
Switch off your Plasma screen and AVC Unit before connecting or disconnecting any
external equipment. Do not switch them on until all external equipment is connected
PC Setup
1
FRONT
Once all equipment has been connected correctly and switched on, press
the AV button on your handset until 'PC' is displayed on the screen.
Once you have entered PC Mode, whatever is being displayed on your
PC monitor, (or laptop screen), will be displayed on your plasma
screen. You can now setup the screen to suit your viewing preferences.
selecting the view mode
You can now select your preferred view mode. There are 3 modes of display to choose - PC FULL, PC
Press the 16:9 button on your handset once. 'PC FULL ' will be displayed on the screen.
1
Press the 16:9 button again and PC NORMAL will be displayed, and press again and PC
38
a
AVC UNIT
REAL will be displayed. Please see opposite for details on each of these modes.
screen as a display.
correctly.
PC
2
b
BACK
NORMAL and PC REAL.
a
PC AUDIO LEAD
b
RGB LEAD*
* It is recommended that
you use an interface cable
(TP-RGBVG) to connect
between the AVC unit and
your PC. (Not supplied).
Connect the PC
AUDIO LEAD
1
between the PC
and AVC Unit.
Connect the
RGB LEAD
2
between the PC
and AVC Unit.
Advertisement
