Source Menu; Pc Mode; Installation - Hitachi 42PD8700U Instructions For Use Manual

The first letter of the selected name starts to
blink. Press /
ter and / button to select the other letters.
By pressing the RED button, you can store
the name.
Insert:
Select the programme which you want to in-
sert by navigation buttons. Press the
GREEN button. By navigation buttons move
the selected programme to the decided
programme space and press the GREEN
button again.
Delete:
To delete a programme, press the YELLOW
button. Pressing the YELLOW button again
erases the selected programme from the
programme list, and the programmes below
shift one up.
APS (Automatic Programming System)
When you press the BLUE button for APS,
the following warning screen will be dis-
played.
PROGRAM
Country
WARNING !
All prestored programs
will be deleted
Press the BLUE button to cancel APS if you
d o n o t wan t t o d e l e t e yo u r e xi s t i n g
programme list.
button to change that let-
UK
OK Cancel
To continue APS, first select the country by
pressing /
RED or "OK" button.
UK - I
After APS is finalized, the programme table
will appear on the screen.

Source menu

By pressing
icon. Source menu appears on the screen.
TV / DTT
AV - 1
AV - 2
AV - 3
AV - 4
AV - 4S
AV - 5
PC RGB
In source menu, highlight a source by
pressing /
mode by pressing

PC Mode

Installation

• Power off both Computer and Display before
making any connections.
• Set your PC's resolution correctly before
connecting to the TV. See the table on page
34 for supported modes.
• Use a D-SUB cable to connect the TV's PC
input to the computer's RGB output termi-
nal.
15 Pin Mini D-Sub Connector
- 24 -
button and then press the
APS is running...
055,25 Mhz
Cancel
/ button, select the sixth
SOURCE : TV
button and switch to that
/ or "OK"button.