Table of Contents
Advertisement
3. Network Functions
3.1 Configuring and controlling the projector via a web browser (continued)
3.1.6 Alert Settings
Displays and configures failure & alert settings.
Alert Item
Cover Error
Fan Error
Lamp Error
Temp Error
Air Flow Error
Cold Error
Filter Error
Other Error
Schedule Execution
Error
Lamp Time Alarm
Filter Time Alarm
Transition Detector
Alarm
Cold Start
Authentication Failure
Refer to
"Troubleshooting" in the User's Manual – Operating Guide for further
detailed explanation of Error except Other Error and Schedule Execution Error.
20
The lamp cover has not been properly fixed.
The cooling fan is not operating.
The lamp does not light, and there is a possibility that interior
portion has become heated.
There is a possibility that the interior portion has become
heated.
The internal temperature is rising.
There is a possibility that the interior portion has become
overcooled.
Filter time over.
Other error.
If displaying this error, please contact your dealer.
Schedule Execution error. (
Lamp time over Alarm Time setting.
Filter time over Alarm Time setting.
Transition Detector Alarm. (
Manual – Operating Guide)
• If STANDBY MODE is set to NORMAL, the projector's power
status changes from off to standby state.
• If STANDBY MODE is set to SAVING, the projector's power
status changes from standby state to on (the lamp is turned on).
(
SETUP menu in the User's Manual – Operating Guide)
The SNMP access is detected from the invalid SNMP
community.
Description
22)
OPTION menu in the User's
Advertisement
Table of Contents
