Subscribe to Our Youtube Channel
Summary of Contents for METRObility Optical Systems R200
- Page 1 ADIANCE R200 REMISE ERVICE LATFORM Installation & User Guide Models: R200-AC / R200-DC...
- Page 2 Metrobility Optical Systems, Inc. © 2002-03 Metrobility Optical Systems, Inc. All rights reserved. Printed in USA.
-
Page 3: Table Of Contents
Metrobility Optical Systems, the Metrobility Optical Systems logo, NetBeacon and WebBeacon are trademarks of Metrobility Optical Systems, Inc. All others are trademarks of their respective owners. The information contained in this document is assumed to be correct and current. The manufacturer is not responsible for errors or omissions and reserves the right to change specifications at any time without notice. -
Page 4: Overview
Overview The Radiance R200 Premise Service Platoform is the ideal solution for the installation of a single Radiance access line card at a remote site. While the R200 supports all single-slot interface line cards, it provides an especially cost effective way to manage a standalone access line card at the customer site. The R200 features a solid metal housing and an internal AC or DC power supply. -
Page 5: Installation Guide
Installation Guide Follow the simple steps outlined in this section to install and start using the Radiance R200 Premise Service Platform. NOTE: Electrostatic discharge precautions should be taken when handling any line card. Proper grounding is recommended (i.e., wear a wrist strap). Unpack the Platform and Accessories Check that the following components are included: •... -
Page 6: Step 3: Install The Line Cards
Install the Line Card The R200 Premise Service Platform supports one single-slot Radiance interface line card. A Radiance line card offers the ease of plug-and- play installation and is hot-swappable. Refer to the card’s documenta- tion for detailed installation instructions. Before installing any card, note the following: •... -
Page 7: Step 4: Connect To The Network
Connect to the Network To connect to the network, refer to the card’s installation and user guide for information about the cable types and lengths supported. Attach the Grounding Lug (R200-DC Only) On the back panel, the R200-DC has a small hole where a grounding lug must be installed. - Page 8 DC plug connector wire leads • Insert the plug connector into the header on the R200 and tighten the two screws. 48 VDC 1 AMP DISCONNECT ALL POWER SOURCES BEFORE SERVICING • Turn ON the DC voltage source. • Verify proper power connection and operation by observing that the power (PWR) LED on the line card is lit.
-
Page 9: User Guide
User Guide This section contains information regarding the technical specifications and warranty for the Radiance R200 Premise Service Platform. Platform Technical Specifications Power Input R200-AC _________________________________ 100-250V AC, 50/60Hz R200-DC _______________________________________ 48V DC (SELV) Output ____________________________________________ 5V DC, 2A, 10W Environmental Operating Temperature ____________________________________ 0 to 50 C Storage Temperature ____________________________________ -25 to 70 C... -
Page 10: Product Safety, Emc And Compliance Statements
Product Safety, EMC and Compliance Statements This equipment complies with the following requirements: • UL • CSA • CE • EN60950 (safety) • FCC Part 15, Class A • EN55022-A (emissions) • EN55024: 1998 (immunity) • DOC Class A (emissions) This product shall be handled, stored and disposed of in accordance with all governing and applicable safety and environmental regulatory agency require- ments. -
Page 11: Warranty And Servicing
Warranty and Servicing Three-Year Warranty for the Radiance R200 Premise Service Platform Metrobility Optical Systems, Inc. warrants that every Radiance product will be free from defects in material and workmanship for a period of THREE YEARS from the date of Metrobility shipment. This warranty covers the original user only and is not transferable. - Page 12 Product Manuals The most recent version of this manual is available online at http://www.metrobility.com/support/manuals.htm To obtain additional copies of this manual, contact your reseller, or call 1.877.526.2278 or 1.603.880.1833 Product Registration To register your product, go to http://www.metrobility.com/support/registration.asp 25 Manchester Street, Merrimack, NH 03054 USA tel: 1.603.880.1833 •...
Need help?
Do you have a question about the R200 and is the answer not in the manual?
Questions and answers