Table of Contents
Advertisement
OPERATING INSTRUCTIONS
Making Coffee
1. Open the top cover of coffee maker and fill in the appropriate amount water into the tank
with the carafe. The water level should not exceed the MAX level.
2. Place the funnel into the funnel support and make sure it is assembled correctly. Insert and
position the filter correctly.
3. Add ground coffee into the filter. Usually a cup of coffee needs a leveled spoon of ground
coffee, but you may adjust according to your taste.
4. Insert the carafe on the warming plate.
5. Plug the power cord into the outlet, the LCD will display "12:00"(see Control Panel).
6. Press ON/OFF button, the red lamp of RUN will be illuminated. The appliance will begin
working.
NOTE: While brewing, you may remove the carafe for serving. The appliance will stop
dripping automatically, but the time cannot exceed 30 seconds.
7. Do not open the tank cover when brewing is in progress. The flow back of hot water will
damage the appliance.
8. You can remove the carafe, pour and serve when finished brewing (about 1 minute after
the coffee stops dripping).
NOTE: The volume of brewed coffee will be less than the water filled initially since ground
coffee absorbs some water. For Safety, keep the carafe lid closed.
9. Always turn OFF the coffee maker before unplugging the power cord from the electrical
outlet and when the coffee maker is not in use.
NOTE: Be cautious when pouring the hot coffee.
8
Advertisement
Table of Contents
