Lorex Edge LH300 SERIES Instruction Manual page 112

Appendix B: Connecting Motion / Alarm Devices
NOTE: You can also drag the cursor on the screen during full screen mode, to pan and tilt the
camera.
Configuring PTZ Pre-sets
Saving a preset:
1. Pan, tilt, zoom the camera to the desired position.
2. Click the SET button.
3. Click on the desired Preset buttons (1~50) to save the preset.
Opening a preset:
1. Click on the desired preset button.
• The camera automatically pans to the saved preset location.
Deleting a preset:
1. Click the CLEAR button.
2. Click on the desired preset you wish to delete.
98
Drag cursor on screen to pan/tilt the camera