Creating A Detour; Changing Current Method - Alpine Navigation Radio Owner's Manual

4. When you have selected all the roads that you wish to
avoid, select "OK to Proceed". The system will now re-
calculate your route.
To view a map of the destination, select the destination ad-
dress located at the bottom of the
press ENTER. The map appears.

Creating a Detour

When you encounter an undesirable road condition, you can
use the Detour option to calculate a different route, if possible,
from the next intersection for 1 mile on surface streets and 5
miles on freeways.
1. To create a detour, select "Detour" from the Select
screen. Press ENTER.
2. A confirmation screen appears. Select "Yes" to create a
detour. Press ENTER.
3. The system will then re-calculate the route.
Changing Current Routing Method
This screen allows you to customize the route by selecting the
quickest route, minimizing or maximizing freeway travel, or
minimizing toll roads. Only 1 option at a time may be chosen.
1. To change the current routing method, select "Change
screen and
Maneuver List
2. The
3. Press ENTER. The system will now use the new routing
Current Method" from the
Change Current Method
screen appears. Select the de-
sired mode.
: Calculates the shortest driving time.
Quickest Route
•
: Makes the most efficient use of
Maximize Freeways
•
freeways.
: Uses mostly surface streets.
Minimize Freeways
•
: Uses the least number of pay
Minimize Toll Roads
•
roads.
information when calculating a route.
R M
OUTE ENU
screen.
Select
37