Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Globalsat GPS Information
- Page 1 GPS Information User Manual Ver. 1.0...
- Page 2 GPS Information Installation Procedure Users can use the GPSinfo.exe program to verify that the GPS is actually configured properly and working. Also, users can use the GPSinfo.exe program to enable WAAS/EGNOS and power saving mode. ＊Note: If you are installing GPS Information onto both PC and PDA, make sure your PDA is properly connected to the PC before installation begins.
- Page 3 STEP 2. Follow the given instructions to complete the installation.
- Page 4 STEP 3. Once the installation is completed, installation of GPS Information onto PDA device will be launched automatically. GPS Information Screen Shots 1. Setup Window (NoteBook PC Screen Shot)
- Page 5 (PocketPC Screen Shot) "Scan Com Port" - Scan all available communication port for GPS reception "Cold Start" - Cold start the GPS receiver "Power Save" - Check the box to enable/disable the Power Save Mode (the option is available only when a GPS device is found) "Tab Menu"...
- Page 6 2. GPS Info Window (NoteBook PC Screen Shot) (PocketPC Screen shot) “Satellite Distribution Map” – Display the position of all connected Satellites 1. A unique number is assigned to each satellite. 2. Red circle indicates that the satellite location is known from almanac information; however, the satellite is not currently being tracked.
- Page 7 “Satellite Status Chart” – display the status of each connected satellite 1. The number under each bar marks corresponding Satellite, and the height of each bar represents the strength of the satellite. 2. Red bar indicates that the satellite location is known from almanac information; however, the satellite is not currently being tracked.
Need help?
Do you have a question about the GPS Information and is the answer not in the manual?
Questions and answers