Information Reference List - Epson Endeavor VL Specifications

Hide thumbs Also See for Endeavor VL:
Table of Contents

Advertisement

Installation/Support Tips
Installing Diskette Drives
Make sure that the drive type has been correctly selected in
the SETUP program.
Installing Hard Disk Drives
type table to select the correct type number for the drive.
If the parameters for your drive are not listed, you can
define your own drive type by selecting drive type 47 and
entering the drive's exact parameters for this userdefined
drive type.
controller be used if you are installing a drive that cannot
use the embedded IDE interface. If you install a non-IDE
hard disk drive and controller card, use the SETUP
program to disable the built-in IDE hard disk drive
interface.
Software Problems
try the installation at high speed. If this does not work
properly, select low speed by pressing
loading the program at low speed and then switching to
high speed, if possible.
Cl When using a software package that uses a key disk as its
copy-protection method, try loading it at high speed. If
this does not work, load it at low speed.
Booting Sequence
If you cannot boot the computer from the hard disk, make
sure the booting sequence in SETUP is set to A: then C : .
Then boot the computer from a system diskette in drive A.
Password
Make sure that you do not forget the password you set up. If
you do:
1. Disable the password by setting DIP switch 4 on the main
system board to ON.
2. Then turn the computer on, wait 20 seconds, and turn it
off again.
3. Set
DIP switch
4
to OFF to enable the password function.
4. Run SETUP to enter a new password, if desired.
You can also enter a hot key designation in SETUP to secure
the system from unauthorized users. Once a password and
hot key have been set, when the hot key is pressed, the
keyboard and mouse lock until the user enters the password.

Information Reference List

Engineering Change Notices
None.
Technical Information Bulletins
None.
Product Support Bulletins
None.
Related Documentation
TM-ENDVRVL
PL-ENDVRVL
400305700
Try
Ctrl Alt - .
3/94
EPSON Endeavor VL
EPSON Endeavor VL Service Manual
EPSON Endeavor VL Parts Price List
EPSON Endeavor VL User's Guide
EPSON Endeavor VL-11

Advertisement

Table of Contents
loading

Table of Contents