Table of Contents
Advertisement
< MIDI Prefs
The second tab of the Preferences contains the MIDI options. At the bottom of this tab is a list of all the available
MIDI input devices on your computer. Each device has a "Yes/No" option to enable or disable it. Set the MIDI
device to "Yes" if you wish to use it to control Torq. Otherwise, set the device to "No" and Torq will ignore it
(allowing you to use it to control a different application, such as when ReWired into another host program).
Once you have enabled a MIDI Input, you will be able to use it to control Torq by means of MIDI Learn, which will
be described next.
< MIDI Learn
Every musician approaches their craft from a slightly different direction. DJing is no different. That is why Torq is
basically a blank slate when run for the first time—there are no pre-set control assignments for any of the buttons,
knobs, or sliders seen on screen for you to memorize. Instead, you get to assign the most important controls for
you to whatever MIDI controls make the most sense to you.
» Creating a MIDI Assignment
Torq uses a simple MIDI Learn scheme to make assigning controls on your MIDI controllers a breeze:
1. Right-click (CTRL-click on Mac) the button, knob, or slider you wish to control via MIDI. The control
will be highlighted in red indicating that Torq is standing by.
2. Move the desired control on your MIDI controller. That is, move the knob or slider you want to use or
press the button/key you wish to use.
3. Torq will intercept the incoming MIDI message and will instantly assign it to the control. The red
highlight will disappear and the MIDI control will be active.
» Clearing a MIDI Assignment
If you've assigned a MIDI control using MIDI Learn and you wish to clear the assignment, simply right-click
(CTRL-click on Mac) the desired control in Torq, then press the Delete key on your computer's keyboard.
Any assignments for the control will be erased.
Torq User Guide
Torq User Guide
»
»
33
33
Chapter 6
Chapter 1
Advertisement
Table of Contents
