Sony RDP-XA900iPN Operating Instructions Manual page 30

• Delete the unit from your Bluetooth device
and perform pairing again (page 19).
AUDIO IN
There is no sound.
• Make sure the audio connecting cable (not
supplied) is connected firmly.
• Make sure the AUDIO IN function is
selected.
• If each terminal is connected to a different
component, and both are playing back, the
unit will output sound from the component
connected to the DIGITAL (OPT)
terminal.
• The DIGITAL (OPT) terminal supports
linear PCM signal only. You may need to
change the sound setting of the connected
component.
The sound is low.
• Confirm the volume of the connected
external component.
• Confirm the volume level on the unit.
26
US
Remote control
The remote control does not function.
• Replace the battery in the remote control
with a new one if it is weak.
• Make sure that you are pointing the remote
control at the remote sensor on the unit.
• Remove any obstacles in the path of the
remote control and the unit.
• Make sure the remote sensor is not
exposed to strong light such as direct
sunlight or fluorescent lamp light.
• Move closer to the unit when using the
remote control.