Panel Illustration - Eonon E1091 User Manual

SIMPLE TROUBLESHOOTING GUIDE
Problem
No power
Some errors occur in the LCD or no
function when pressing the button
Unable to receive stations
Poor effect on receiving
CDs cannot bo loaded
The stereo indicator" "is flashing
No picture
Picture distortion
Wrong region code
No memory on radio sation
Note:If any of the problem persist, consult your nearest service dealer.
Never attempt to disassemble the unit by yourself.
26
Cause/solution
Check the fuse. Replace with the proper
value if necessary
Press the RESET button
Check and make sure the antenna is
properly connected.
Antenna may not have proper length. Make
sure the antenna is fully extended. If broken
replace the antenna with a new one.
The broadcasting signal is too weak.
The antenna is poorly grounded. Check and
make sure the antenna is properly grounded
at its mounting location.
A CD is loaded in the mechanism.
Tune in the frequency accurately
The broadcasting signal is too weak.
(Set to the MONO mode)
The video line from main unit to the TV is
not connected properly.
Improper setting of the color system. Set the
color system to PAL or NTSC, according
to the connected television.
The CD is dirty or damaged.
Under DVD mode ,press" " on
remote control pad twice, the press
arrow on remote control pad,
and press pad 0-6according to your region
For example, if disc region is 1, press
arrow and 1 on the remote control.
Press the station for 3 seconds to
memorize preset station.
For example, if a user wants to
Preset radio frequency FM 88.10
On station 1, just simply press
station 1 for 3 seconds when
frequency is tuned at FM 88.10

Panel illustration

Tel button
Volume button
Mode button
Reset button
Touch screen
1
Tel button
When there comes a call, press it to
Answer the call.(When you want to
Reject or hang up the call, press"
on the front panel or HANG UP touch
key in the TEL touch menu).
Angle button
Remote control sensor
Eject button
Power button
2 Volume button
For volume button, press(
button clack wise to increase the
"
sound level and anti-clockwise to
Decrease the sound level.
) the
3